Skip to main page content


link to bare-metal foil pageClick here to learn about and purchase Bare-Metal® Foil

link to panel scriber pageClick here to read about and purchase the Bare-Metal® Panel Scriber

link to polytek mold rubber pageClick here for Polytek® Mold Making Rubber Compounds

link to hyperlast resin pageClick here for Hyperlast® Polyurethane Casting Resin

link to experts-choice decal pageClick here learn about purchase Experts-Choice® Decal Film




Experts-Choice™ Decal Film is available in both clear and white one and three sheet packs. With Experts-Choice™ plain decal film you can use your own color ink jet or laser printer to make home made decals. You can also use a color photo copier to reproduce any decal of your choice. This material allows you to use existing artwork from books, magazines, computer clip art, or your own original art to create any decal. The standard 8 1/2 X 11 sheets work perfectly with any copier or printer.

  1. #1 First select the image or images you want to scan or create your own graphics in your drawing and printing program. Before you print the images onto the decal paper you may want to make sure that everything fits by printing a sample on plain white paper. If everything fits, proceed with printing your art work on the Experts-Choice™ Decal Film.
  1. #2 After printing, we recommend coating the decal with a fine spray of Microscale Liquid Decal Film (our stock #127). Let this dry and then give it another heavier coat and let it dry thoroughly. If you do not have an airbrush you can use a wide, soft brush.

    This will do two things. It will protect the image from smudging while handling. It will also strengthen the film so it will not bunch up when applying it to your object. You are now ready to apply your decal as you would any other water slide decal.

  1. #3 Cut out the image you wish to apply and place it in a bowl of luke warm water. As soon as it moves easily on the backing paper, remove it from the water.
  1. #4 Slightly moisten the area where you are going to apply the decal with Microscale Micro Set (our stock #129). This will prepare the surface with special wetting agents. Slide the image onto the surface. .
  1. #5 Use a soft damp cloth to blot away excess liquid and smooth the decal in place.

To reading finish instructions go to page 2 or to make a purchase see shopping cart buttons below.

Important notice: Inkjet decal film is intended for use with inkjet printers only. Please choose laser decal film for photocopiers and laser printers. Laser film is located below the inkjet film.


Clear Inkjet Decal Film
No. 122 Three Sheet Pack $6.95
No. 121 Single Sheet Pack $2.50
White Inkjet Decal Film
No. 120 Three Sheet Pack $6.95
No. 119 Single Sheet Pack $2.50
Clear Laser Decal Film
No. 123 Three Sheet Pack $6.95
No. 124 Single Sheet Pack $2.50
White Laser Decal Film
No. 125 Three Sheet Pack $6.95
No. 126 Single Sheet Pack $2.50